BYHMC - METEC 4010C

Product Identification

Product ID:METEC 4010C
MSDS Date:04/10/1991
FSC:3439
NIIN:01-386-0231
MSDS Number: BYHMC

Responsible Party
METALLURGICAL TECHNOLOGIES,INC
14435 MAX ROAD
PEARLAND, TX 77581
US

Emergency Phone: 713-485-7765

Info Phone: 713-485-7765

Cage: 63726

Contractor
METALLURGICAL TECHNOLOGIES,INC
PEARLAND, TX 77581 US

Telephone: 713-485-7765

Cage: 63726

Ingredients

NICKEL

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 95-99%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3


ALUMINIUM

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 5%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ACUTE-BRONCHITIS.
CHRONIC-SIDEROSIS. EYE CONTACT: ACUTE-MECHANICAL IRRITATION.
CHRONIC-CONJUNCTIVITIS.
Explanation of Carcinogenicity:NICKEL METAL IS DEEMED A POSSIBLE CANCER
HAZARD BY NTP. IARC HAS DESIGNATED NICKEL/NICKEL COMPOUNDS AS HUMAN
CARCINOGENS
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:MAY CAUSE ALLERGIC SKIN REACTIONS
OR ASTHMA IN INDIVIDUALS SENSITIVE TO NICKEL.

First Aid

First Aid:EYES-IRRIGATE WITH WATER FOR AT LEAST 15 MIN. SKIN-WASH OFF
IN FLOWING WATER. INGESTION-INDUCE VOMITING IF LARGE AMOUNTS ARE
INGESTED. INHALATION-REMOVE TO FRESH AIR IF EFFECTS OCCUR. CONSULT
PHYSICIA N.

Fire Fighting

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:SALT, DRY SAND, TYPE D EXTINGUISHER.
Fire Fighting Procedures:DO NOT USE WATER. DO NOT DISTURB BURNING
POWDER UNTIL COOL.
Unusual Fire/Explosion Hazard:NOT CONSIDERED FLAMMABLE; HOWEVER, FINELY
DIVIDED POWDER IN THE FORM OF A DUST CLOUD CAN IGNITE IF CONTACTED
BY AN IGNITION SOURCE.

Accidental Release

Spill Release Procedures:VACUUMING RECOMMENDED INSTEAD OF DRY SWEEPING
TO AVOID GENERATION OF AIRBORNE DUST.
Neutralizing Agent:NA

Handling

Handling and Storage Precautions:DO NOT STORE ADJACENT TO STRONG
OXIDIZERS.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NIOSH APPROVED DUST RESPIRATORS WHENEVER DUST
LEVELS ARE ENCOUNTERED.
Ventilation:LOCAL EXHAUST REQUIRED OF OSHA STANDARD IS EXCEEDED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WARNING! CHROME AND/OR NICKEL AND/OR COBALT METAL. PROLONGED OR
EXCESSIVE INHALATION MAY CAUSE CANCER. MAY CAUSE ALLERGIC SKIN
REACTION.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:2642F,1450C
Decomp Temp:Decomp Text:NA
Vapor Pres:1 MM
Vapor Density:NA
Spec Gravity:8.4
pH:NA
Viscosity:NA
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE.
Appearance and Odor:METALLIC GREY POWDER
Percent Volatiles by Volume:NA
Corrosion Rate:NA

Stability

Stability Indicator/Materials to Avoid:YES
PURE OXYGEN OR OTHER OXIDIZERS.
Stability Condition to Avoid:DUSTING, EXPOSURE TO DIRECT FLAME INFINELY
DIVIDED FORM
Hazardous Decomposition Products:CONTACT WITH MINERAL ACIDS LIBERATE
HYDROGEN, WHICH MAY BE FIRE HAZARD.

Disposal

Waste Disposal Methods:PROCEDURES COMPLYING WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.